SafeDistance wearable

SafeDistance is a wearable from Lopos that uses ultra-wideband (UWB) technology to automatically measure the distance between people and/or material handling equipment such as forklifts. It alerts them immediately if they come closer than the required distance through sound, vibration and LED light.

I want a free plug-and-play trial kit »


SafeDistance wearable benefits


SafeDistance can be configured using our app which connects to the SafeDistance wearable by Bluetooth. The collision warning parameters, such as distance, can be adjusted. You can even personalize the types (sound, vibration, light) and number of alerts you receive. SafeDistance can be easily reconfigured if internal policies change.

Learn more

Extremely accurate

In contrast to wearables that use conventional Bluetooth or Wi-Fi signals for location tracking, SafeDistance uses ultra-wideband. UWB measures distances much more accurately, with an error margin of less than 15 centimetres. Bluetooth, in comparison, has an error margin of 2 to 5 metres. This means there are no false alarms when using SafeDistance. The wearable only alerts when you actually get too close.

Ready to use

Simply switch on the SafeDistance wearable and you’re ready to go. There is no expensive infrastructure required such as beacons or gateways.

No privacy issues

SafeDistance does not log any information whatsoever – no personal data or location details – and is therefore GDPR compliant by design.





Ultra-wideband technology

SafeDistance uses revolutionary ultra-wideband radio technology. Emitting low-energy signals at high speeds and bandwidth, UWB is uniquely suited for a location- and distance-tracking wearable compared to other wireless technologies such as Bluetooth.

Three alarm types

Three alarm types

SafeDistance has multiple types of alarms that are activated when workers are potentially in danger: there is an audible beep (100 dBA), a vibration, and an LED light. Administrators can choose to use just one of these alarms or any combination of the three at the same time.


Immediate and accurate feedback

The distance is measured 10 times per second with an accuracy of 10 cm (4 inch). Which means there is an instant alarm in case of danger.


Long battery life

Long battery life

SafeDistance has a battery life 2 to 5 days on a single battery charge. It takes just three hours to fully charge the device with the USB cable supplied.

Always active

Always active

To ensure safe distancing is respected at all times, SafeDistance cannot be switched off while in use as standard. Employees cannot switch the device off to prevent alarms from being triggered if they do not keep their distance. It is only switched off during charging or if it’s not used for a couple of hours.


No interference

SafeDistance is optimized for high-volume deployments and does not suffer from interference. No matter how many devices are active in the same area, they will not interfere with one another.

SafeDistance technical specifications

Technical specifications

  • Dimensions: 4.6 x 4.6 x 1.9 cm – 1.8 x 1.8 x 0.75 inches
  • Weight: 35 grams, 1.25 ounces
  • Sound power: up to 100 dBA
  • Ultra-wideband technology (UWB) for accurate measurements up to <15cm (imperial) at a high speed
  • Battery life: 2 to 5 days | Recharging time: 3 hours | Charging current: 500mA
  • With CE and FCC certification
  • Waterproof: IP65

Download the technical sheet »


Configure your SafeDistance wearables with our free mobile app

You can customize the settings of your SafeDistance wearables with our free mobile app. The following can be configured:

  • Alarm distance (default: 1.5 metres)
  • Alarm type: sound, vibration, LED light or a combination of these (default: all three)
  • Alarm latency: how fast should the wearables activate the alarm? You can add a latency to this, so the alarm doesn’t go off when passing each other in a hallway, for instance (default: 1 second)
  • Device firmware update: when we release new firmware with new features, you can update your SafeDistance wearables using the configuration app
  • Inter alarm delay: once the alarm activates, the inter alarm delay determines how frequent the alarm sounds. If set to 10 seconds, the alarm will activate every 10 seconds for as long as the wearables are too close (default: 1 second)
  • Multiple alarms: you can for instance set a vibration alarm for 2 metres and a sound alarm for 1.5 metres. Or a LED light and vibration alarm that activate immediately, combined with a sound alarm that activates after 5 seconds
  • Whether or not the users can turn off the wearable using the button (default: no)
  • Whether ‘mouth mask mode’ is allowed: when it is, your employees can work close together if necessary. They should then wear a mouth mask, put the wearable on mouth mask mode and the alarm will not activate for 5 minutes (configurable) (default: no)
  • Turn on by movement: when taking the wearable out of the charger, it automatically turns on because of the movement






Choose the optimal way to wear SafeDistance

You can adjust the SafeDistance-wearable to your situation. Not only through the different alarms or configurable distance, but also thanks to the accessories that let you wear and charge the devices the way that suits you best.


Belt clip

With the belt clip, you quickly attach the SafeDistance wearable to your trousers or other pieces of clothing.



With a carabiner you can easily carry your SafeDistance around.



Put our wristband around your SafeDistance to wear it like a watch.


Order your SafeDistance wearables now

You can order a free plug-and-play trial kit, or order your own SafeDistance wearables right away by filling out the form or calling us on +32 9 396 60 11. The wearables priced € 75 – € 99 depending on volume.

    You will find more information about what we do with your data in our privacy policy.